My name is Gregg, I'm in my late 30s, taking care of Mom. Confused about whether I should progress in my studies of chemistry and math, or if I should switch gears into full time ratchet insane glassblowing production project panel assembly line worksman.
I'm interested in blowing glass solely with propane torches acquired from the hardware store, and using little to no annealing- as I understand this is possible with smaller works and is adequate for my size apparatus (essentially a 10-15mLish side arm flask.
Basically wanting to make a t seal on a tube with a bubble at the end. A good quality one, utilizing once again propane only and little to no annealing (no oven kiln gas tanks or fancy torch)
Im looking for advice
Sincerely,
Gregg
I'm interested in blowing glass solely with propane torches acquired from the hardware store, and using little to no annealing- as I understand this is possible with smaller works and is adequate for my size apparatus (essentially a 10-15mLish side arm flask.
Basically wanting to make a t seal on a tube with a bubble at the end. A good quality one, utilizing once again propane only and little to no annealing (no oven kiln gas tanks or fancy torch)
Im looking for advice
Sincerely,
Gregg
